Epoksi Shop Primer
SIGMAWELD 120
- VS : %21
- Renk : Oksit Kırmızı
Çinko Etil Silikat Shop Primer
SIGMAWELD 199
- VS: 25% Colour: Green/Grey*, Oxide Red
PPG shop primer holds a weldability certificate.
Çinko Fosfat Epoksi Astar
SIGMAFAST 278
- Seri Kuruma
- Short overcoating interval – 2 hours at 20°C
- No limit on the maximum overcoating interval
- Can be used as a primer and/or intermediate coat
- -5°C’ye kadar kürlenebilir
- MIO versiyonu mevcut
- Tek katta 250 mikron uygulanabilme
- VS: 80% Colour: Light grey, Oxide red, Dark grey (for MIO)
Galvaniz Epoksi Astar
SIGMACOVER 280
- Can be applied to galvanized steel, stainless steel, aluminium, and similar surfaces
- Can be applied over existing epoxy, polyurethane, and alkyd paint surfaces
- Can be applied after wet abrasive blasting and water-jet cleaning
- Suitable for repairing welds and damaged areas on previously painted surfaces
- VS: 57% Colour: Yellow/Green, Oxide red
- Çinkoca Zengin Epoksi Astar
SIGMAZINC 102HS
- Zinc content 65% – SSPC Paint 20 – Level 3
- VS: %66
SIGMAZINC 109HS
- Zinc content 81% – SSPC Paint 20 – Level 2 and ISO 12944
- VS: %81
SIGMAZINC 109
- Zinc content 91% – SSPC Paint 20 – Level 1 and ISO 12944
- VS: %46
Zinc-rich ethyl silicate primer / Inorganic Zinc Silicate
SIGMAZINC 158
- Cures with moisture in the air. Minimum 50% relative humidity
- In low-humidity conditions, it can be wetted with water 2 hours after application
- -90 °C – 400 °C arasında çalışabilme
- Resistant to temperatures up to 500 °C with a suitable topcoat
- Zinc content 76% – SSPC Paint 20 – Level 3
- Slip-coefficient certificate (ASTM A-490 Class B)
- VS: %65 Renk: Gri
Zinc-rich ethyl silicate primer / Inorganic Zinc Silicate
SIGMAZINC 9
- Cures with moisture in the air. Minimum 50% relative humidity
- In low-humidity conditions, it can be wetted with water 2 hours after application
- +400 °C’ye kadar kuru sıcaklık dayanımı
- Resistant to temperatures up to 500 °C with a suitable topcoat
- Zinc content 85% – SSPC Paint 20 – Level 1
- VS: %65 Renk: Gri
Çinkolu Epoksi Astar
SIGMAZINC 105
- Very short overcoating interval – 25 minutes at 20 °C
- -5°C’ye kadar kürlenebilir
- Düşük çinko oranı
- VS: %65
SIGMACOVER 410
- Epoksi ara kat/son kat
- Ekonomik fiyat
- MIO ve farklı renklerde hazırlanabilir
- No limit on the maximum overcoating interval
- Tek katta 200 mikron uygulanabilme
- VS: 80%
- Colour: Off-white, Grey, Oxide Red, Cream and Other ColoursColour: Grey
SIGMAFAST 205
- Zinc phosphate epoxy primer / intermediate coat / topcoat, semi-gloss
- Ekonomik metrekare maliyet
- Farklı renklerde hazırlanabilir
- Can be applied to shop-primed or abrasive-blasted steel surfaces
- Can be applied in a single coat of 75-150 microns
- 20°C’de 6 saat içinde sert kuruma
- VS: 70% Renk: Ral Renkleri
SIGMACOVER 456
- Epoksi ara kat / son kat, yarı parlak
- Farklı renklerde hazırlanabilir
- Can cure down to -10°C and at relative humidity up to 95%
- Can be applied over existing epoxy, polyurethane, and alkyd paint surfaces
- Can be applied in a single coat of 75-150 microns
- 20°C’de 6 saat içinde sert kuruma
- VS: 65% Renk: Ral Renkleri
POLİÜRETAN SONKAT ÜRÜNLER
SIGMADUR 550
- Aliphatic acrylic polyurethane topcoat, gloss
- -5°C’ye kadar kürlenebilir
- Can be applied in a single coat of 50-60 microns
- VS:55% Renk: Ral Renkleri, Alumniyum renk alternatifi yok
SIGMADUR 520
- Aliphatic acrylic polyurethane topcoat, semi-gloss
- -5°C’ye kadar kürlenebilir
- Can be applied in a single coat of 50-75 microns
- VS: 58% (beyaz), 48% (aluminyum) Renk: Ral Renkleri ve Aluminyum renk
SIGMADUR 568
- Single-coat polyurethane (primer / topcoat), gloss
- Can be applied to shop-primed or abrasive-blasted steel surfaces
- -5°C’ye kadar kürlenebilir
- Can be applied in a single coat of 75-150 microns
- VS: 68% Renk: Ral Renkleri, Alumniyum renk alternatifi yok
SIGMAFAST 210
- Single-coat zinc phosphate polyurethane (primer / topcoat), semi-gloss
- Can be applied to shop-primed or abrasive-blasted steel surfaces
- Can be applied in a single coat of 80-120 microns
- VS: 55% Renk: Ral Renkleri ve Alumniyum renk alternatifi yok
PPG ÖZEL ÜRÜNLER
Repair primer for zinc-rich primers
SIGMAZINC 19
- Tek komponent çinkoca zengin epoksi
- Zinc content 90% – SSPC Paint 20 – Level 1 / ISO 12944
- Can be applied after power-tool cleaning to St 2
- Developed for repairing zinc ethyl silicate and zinc-rich epoxy primers
- Eski galvaniz yüzeylere uygulanabilir
- -10°C’ye kadar kuruyabilir
- 125°C kuru sıcaklığa dayanıklı VS: 38%
Coating under insulation / Repair primer for zinc-rich primers
HI-TEMP 1027
- Single-component, high-temperature-resistant coating
- Resistant to thermal stress between -185 and 650 °C
- Can be applied to surfaces at 316 °C
- Can be applied after power-tool cleaning to St 2
- Can be used to repair zinc ethyl silicate and zinc-rich epoxy primers
- Renk: Gri
HI-TEMP 1000VS
- Single-component, high-temperature-resistant topcoat
- Colour: White, Blue, Green, Grey, Yellow, Red
Coating under insulation / Repair primer for zinc-rich primers
HI-TEMP 1027 / HI-TEMP 1000VS Boya Sistemleri
İzolasyonlu Yüzeyler İçin
- Kat HI-TEMP 1027 125-150 mikron
- Kat HI-TEMP 1027 125-150 mikron
İzolasyonsuz Yüzeyler İçin
- Kat HI-TEMP 1027 125-150 mikron
- Kat HI-TEMP 1000VS 50-63 mikron
ISIYA DAYANIKLI ÜRÜNLER
SIGMATHERM 175 Modifiye Alkid Aluminyum, max. 175°C
SIGMATHERM 350 Slikon Akrilik Aluminyum, max. 350°C
SIGMATHERM 540VS Slikon Aluminyum, max. 540°C